Lediga jobb BTR Personnel services AB i Skellefteå

Se alla lediga jobb från BTR Personnel services AB i Skellefteå. Genom att välja ett specifikt yrke kan du även välja att se alla lediga jobb i Skellefteå som finns inom det yrket.

Construction Manager

Ansök    Aug 2    BTR Personnel services AB    Platschef, anläggning
The Construction Manager is responsible for overseeing and managing various aspects of the site. The primary role of this role is to ensure that construction projects are completed safely, efficiently and within budget. The duties and responsibilities of this position include: • Participate in project planning and coordination of activities, including review of project specifications, blueprints, and work schedules. This role works closely with project man... Visa mer
The Construction Manager is responsible for overseeing and managing various aspects of the site. The primary role of this role is to ensure that construction projects are completed safely, efficiently and within budget. The duties and responsibilities of this position include:
• Participate in project planning and coordination of activities, including review of project specifications, blueprints, and work schedules. This role works closely with project managers, architects and engineers to understand project requirements and ensure the necessary resources are available.
• The Construction Manager is responsible for supervising and managing construction teams, including subcontractors and laborers. Assigns tasks, provides guidance and ensures that work is performed in accordance with project plans and quality standards. Daily supervision and monitoring of works so that the equipment is mounted and the installation is carried out in accordance with the rules of the profession. Coordinates employee training and monitors their work performance.
• Conduct regular safety inspections, identify potential hazards and take corrective action to prevent accidents and ensure compliance with health and safety regulations.
• The Construction Manager monitors the quality of construction work and materials to ensure compliance with project specifications and industry standards. Perform regular inspections, collaborate with quality control teams and resolve any issues or deviations from required quality standards.
• Monitors resource allocation and works to optimize productivity and efficiency. Monitoring the condition of materials and tools on the project. Preparation of specifications and ordering of equipment and materials.
• Identifying and solving problems. Analyzes problems, proposes solutions and collaborates with project teams to implement effective solutions while minimizing delays or disruptions.
• The construction manager is responsible for ensuring compliance with legal and regulatory requirements related to construction projects, such as building codes, permits and environmental regulations. Works closely with Occupational Safety and Health, Human Resources and Legal to implement relevant regulations on site. Ensures compliance with all regulations and procedures prescribed by the company and is responsible for ensuring that every employee on the construction site complies with company and legal regulations.
• Maintains accurate and organized project documentation. Keeps records of project milestones, inspections and any incidents or accidents that occur on site. Coordination and active participation in the preparation of documentation for the handover of the facility.
• Identifies areas for improvement and implements best practice. Monitors industry trends, technological advances and construction techniques to improve project efficiency and quality.
• Coordinates with project stakeholders, including clients, contractors, and suppliers.
• Prepares and submits regular progress reports, including cost tracking, work schedule and overall project status.

Conditions:
• Diploma of vocational education - technical profession or BSc in technical field
• Knowledge of the English language – B1
• Driver's license
• At least 3 years of work experience in the position of manager


Ability:
• Installation troubleshooting
• Changes in the project
• Alignment with the acquired state of the object
• Good communication
• Ability to organize work and people
• Ability to manage time
• Ability to develop and raise knowledge among employees in the team Visa mindre
Ansök

Installer

Ansök    Jul 10    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Electrical Installation Worker

Ansök    Jun 24    BTR Personnel services AB    Installationselektriker
Electrical Installation Worker is responsibile for the installation of electrical systems, including rack routes, equipment mounting and connection, and electrical cabinet setup. Responsibilities: · Rack Route Placement: Efficiently plan and implement rack routes according to project specifications, ensuring optimal organization and accessibility. · Equipment Mounting and Connection: Safely and securely mount electrical equipment, ensurin... Visa mer
Electrical Installation Worker is responsibile for the installation of electrical systems, including rack routes, equipment mounting and connection, and electrical cabinet setup.

Responsibilities:

· Rack Route Placement: Efficiently plan and implement rack routes according to project specifications, ensuring optimal organization and accessibility.

· Equipment Mounting and Connection: Safely and securely mount electrical equipment, ensuring proper alignment and connection to power sources and other components.

· Electrical Cabinet Connection: Install and connect electrical cabinets, adhering to safety protocols and industry standards.

· Reading Electrical and Mechanical Projects: Interpret electrical and mechanical project documents to understand installation requirements, including layout plans, equipment specifications, and technical drawings.

· Reading Electrical Schematics: Analyze and comprehend electrical schematics to accurately implement wiring and connection strategies.

· Installation of Electrical Lines and Cables: Execute the installation of electrical lines and cables with precision, considering factors such as routing, insulation, and capacity.

· Installation of Electrical Equipment and Connection: Install various electrical equipment, such as switches, outlets, and control panels, ensuring proper functioning and connectivity.

· Collaboration: Work closely with project managers, engineers, and other team members to coordinate installation activities and resolve any issues that may arise during the process.

Requirements:

· Proven experience in electrical installation, preferably in a similar role.
· Proficiency in reading and interpreting electrical and mechanical project documents, including schematics, layouts, and technical drawings.
· Strong understanding of electrical systems and components, including wiring, cables, and equipment.
· Familiarity with industry standards and safety regulations related to electrical installations.
· Excellent attention to detail and accuracy in executing installation tasks.
· Ability to work independently and as part of a team, demonstrating strong communication and collaboration skills.
· Physical stamina and dexterity to perform tasks requiring manual labor and working in various environments. Visa mindre
Ansök

Electrical Installation Team Leader

Ansök    Jun 24    BTR Personnel services AB    Installationselektriker
Electrical Installation Team Leader The Electrical Installation Team Leader is responsible for supervising and coordinating the activities of installation workers, overseeing project progress, and maintaining high-quality standards. Responsibilities: · Lead and supervise a team of electrical installation workers, providing guidance, support, and direction to ensure project objectives are met efficiently and effectively. · Coordinate with ... Visa mer
Electrical Installation Team Leader

The Electrical Installation Team Leader is responsible for supervising and coordinating the activities of installation workers, overseeing project progress, and maintaining high-quality standards.

Responsibilities:


· Lead and supervise a team of electrical installation workers, providing guidance, support, and direction to ensure project objectives are met efficiently and effectively.
· Coordinate with project managers to plan and schedule installation activities, allocate resources, and ensure timely project completion while adhering to budget and quality standards.
· Manage the allocation of materials, equipment, and manpower to optimize productivity and minimize waste.
· Enforce quality control measures to ensure that installations meet or exceed industry standards and client expectations.
· Provide training and mentoring to installation team members, fostering skill development and promoting a culture of continuous learning and improvement.
· Ensure that all installation activities are conducted in compliance with safety regulations and company policies, promoting a safe work environment for all team members.
· Address any issues or challenges that arise during installation projects, collaborating with team members and stakeholders to find effective solutions.
· Maintain accurate records of project progress, including work hours, materials used, and any deviations from the original plan, for reporting and documentation purposes.

Requirements:


· Extensive experience in electrical installations, with a proven track record of successful project management and leadership.
· Strong technical knowledge of electrical systems, components, and installation techniques.
· Excellent leadership and interpersonal skills, with the ability to motivate and inspire team members to achieve goals and overcome challenges.
· Effective communication skills, both verbal and written, with the ability to interact professionally with clients, team members, and other stakeholders.
· Strong organizational and problem-solving abilities, with keen attention to detail and the ability to prioritize tasks effectively.
· Proficiency in reading and interpreting electrical schematics, blueprints, and other technical documents.
· Familiarity with safety regulations and best practices related to electrical installations.
· Relevant certifications or licenses may be advantageous. Visa mindre
Ansök

Installer I class

Ansök    Jun 24    BTR Personnel services AB    Installationstekniker
Installer I class - job description I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by r... Visa mer
Installer I class - job description
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

III. Ability
• Troubleshooting installation issues
• Changes in the project
• Alignment with the acquired state of the object

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Installer

Ansök    Apr 22    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Installer

Ansök    Jun 24    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Installation Unit Manager

Ansök    Jun 24    BTR Personnel services AB    Installationselektriker
Job Description: Installation Unit Manager Position Overview: The Installation Unit Manager is responsible for overseeing the entire installation process of products or systems within the company. This role involves planning, coordinating, and supervising installation projects to ensure they are completed on time, within budget, and to the required quality standards. The Installation Unit Manager will work closely with clients, project managers, and instal... Visa mer
Job Description: Installation Unit Manager
Position Overview: The Installation Unit Manager is responsible for overseeing the entire installation process of products or systems within the company. This role involves planning, coordinating, and supervising installation projects to ensure they are completed on time, within budget, and to the required quality standards. The Installation Unit Manager will work closely with clients, project managers, and installation teams to achieve successful project outcomes.
Key Responsibilities:
Project Management: Lead and manage installation projects from initiation to completion, ensuring all project goals and objectives are met.
Team Supervision: Supervise, train, and support the installation team, providing guidance and direction to ensure high performance and adherence to company standards.
Scheduling: Develop and maintain project schedules, coordinating with other departments to ensure timely and efficient project execution.
Quality Control: Monitor and ensure the quality of installations, conducting inspections and implementing corrective actions as needed.
Client Liaison: Serve as the primary point of contact for clients during the installation process, addressing any concerns and ensuring client satisfaction.
Budget Management: Oversee project budgets, managing costs and resources effectively to stay within financial constraints.
Safety Compliance: Ensure all installation activities comply with health and safety regulations, promoting a safe working environment for all team members.
Problem Solving: Identify and resolve any issues or obstacles that arise during the installation process, minimizing disruptions and delays.
Reporting: Prepare and present regular project status reports to senior management, highlighting progress, challenges, and solutions.

Qualifications:
Bachelor's degree in engineering, construction management, or a related field.
Proven experience in installation management or a similar role.
Strong leadership and team management skills.
Excellent organizational and project management abilities.
Effective communication and interpersonal skills.
Proficiency in project management software and tools.
Knowledge of health and safety regulations related to installation activities.
Ability to work under pressure and meet tight deadlines.

Personal Attributes:
Detail-oriented with a strong focus on quality.
Proactive and solution-oriented mindset.
Strong problem-solving skills.
Ability to adapt to changing project requirements and environments.
High level of professionalism and integrity.

Working Conditions:
This position may require working in various locations, including construction sites, client premises, and office settings.
Occasional travel may be required depending on project locations. Visa mindre
Ansök

Installer

Ansök    Apr 9    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Installer

Ansök    Apr 15    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Site Manager

Ansök    Apr 9    BTR Personnel services AB    Platschef, anläggning
The Site Manager is responsible for overseeing and managing various aspects of the site. The primary role of this role is to ensure that construction projects are completed safely, efficiently and within budget. The duties and responsibilities of this position include: • Participate in project planning and coordination of activities, including review of project specifications, blueprints, and work schedules. This role works closely with project managers, a... Visa mer
The Site Manager is responsible for overseeing and managing various aspects of the site. The primary role of this role is to ensure that construction projects are completed safely, efficiently and within budget. The duties and responsibilities of this position include:
• Participate in project planning and coordination of activities, including review of project specifications, blueprints, and work schedules. This role works closely with project managers, architects and engineers to understand project requirements and ensure the necessary resources are available.
• The Site Manager is responsible for supervising and managing construction teams, including subcontractors and laborers. Assigns tasks, provides guidance and ensures that work is performed in accordance with project plans and quality standards. Daily supervision and monitoring of works so that the equipment is mounted and the installation is carried out in accordance with the rules of the profession. Coordinates employee training and monitors their work performance.
• Conduct regular safety inspections, identify potential hazards and take corrective action to prevent accidents and ensure compliance with health and safety regulations.
• The Site Manager monitors the quality of construction work and materials to ensure compliance with project specifications and industry standards. Perform regular inspections, collaborate with quality control teams and resolve any issues or deviations from required quality standards.
• Monitors resource allocation and works to optimize productivity and efficiency. Monitoring the condition of materials and tools on the project. Preparation of specifications and ordering of equipment and materials.
• Identifying and solving problems. Analyzes problems, proposes solutions and collaborates with project teams to implement effective solutions while minimizing delays or disruptions.
• The site manager is responsible for ensuring compliance with legal and regulatory requirements related to construction projects, such as building codes, permits and environmental regulations. Works closely with Occupational Safety and Health, Human Resources and Legal to implement relevant regulations on site. Ensures compliance with all regulations and procedures prescribed by the company and is responsible for ensuring that every employee on the construction site complies with company and legal regulations.
• Maintains accurate and organized project documentation. Keeps records of project milestones, inspections and any incidents or accidents that occur on site. Coordination and active participation in the preparation of documentation for the handover of the facility.
• Identifies areas for improvement and implements best practice. Monitors industry trends, technological advances and construction techniques to improve project efficiency and quality.
• Coordinates with project stakeholders, including clients, contractors, and suppliers.
• Prepares and submits regular progress reports, including cost tracking, work schedule and overall project status.

Conditions:
• Diploma of vocational education - technical profession or BSc in technical field
• Knowledge of the English language – B1
• Driver's license
• At least 3 years of work experience in the position of manager


Ability:
• Installation troubleshooting
• Changes in the project
• Alignment with the acquired state of the object
• Good communication
• Ability to organize work and people
• Ability to manage time Visa mindre
Ansök

Installer

Ansök    Apr 5    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Electrical Installation Worker

Ansök    Apr 3    BTR Personnel services AB    Installationselektriker
Electrical Installation Worker is responsibile for the installation of electrical systems, including rack routes, equipment mounting and connection, and electrical cabinet setup. Responsibilities: · Rack Route Placement: Efficiently plan and implement rack routes according to project specifications, ensuring optimal organization and accessibility. · Equipment Mounting and Connection: Safely and securely mount electrical equipment, ensuri... Visa mer
Electrical Installation Worker is responsibile for the installation of electrical systems, including rack routes, equipment mounting and connection, and electrical cabinet setup.

Responsibilities:

· Rack Route Placement: Efficiently plan and implement rack routes according to project specifications, ensuring optimal organization and accessibility.

· Equipment Mounting and Connection: Safely and securely mount electrical equipment, ensuring proper alignment and connection to power sources and other components.

· Electrical Cabinet Connection: Install and connect electrical cabinets, adhering to safety protocols and industry standards.

· Reading Electrical and Mechanical Projects: Interpret electrical and mechanical project documents to understand installation requirements, including layout plans, equipment specifications, and technical drawings.

· Reading Electrical Schematics: Analyze and comprehend electrical schematics to accurately implement wiring and connection strategies.

· Installation of Electrical Lines and Cables: Execute the installation of electrical lines and cables with precision, considering factors such as routing, insulation, and capacity.

· Installation of Electrical Equipment and Connection: Install various electrical equipment, such as switches, outlets, and control panels, ensuring proper functioning and connectivity.

· Collaboration: Work closely with project managers, engineers, and other team members to coordinate installation activities and resolve any issues that may arise during the process.

Requirements:

· Proven experience in electrical installation, preferably in a similar role.
· Proficiency in reading and interpreting electrical and mechanical project documents, including schematics, layouts, and technical drawings.
· Strong understanding of electrical systems and components, including wiring, cables, and equipment.
· Familiarity with industry standards and safety regulations related to electrical installations.
· Excellent attention to detail and accuracy in executing installation tasks.
· Ability to work independently and as part of a team, demonstrating strong communication and collaboration skills.
· Physical stamina and dexterity to perform tasks requiring manual labor and working in various environments. Visa mindre
Ansök

Site Quality Coordinator

Ansök    Apr 5    BTR Personnel services AB    Kvalitetskoordinator
Your field of activity - challenging and future-oriented · Project Assessments, 1st party Walkdowns, 2nd party Walkdowns. · Review ITPs · Witness of Hold points. · Contractor Surveillance and Performance Reporting · Verification of change management, including deviations · Approval of subcontractors and review of contractors' data and certification, inspection, and release of purchased components. · Management and r... Visa mer
Your field of activity - challenging and future-oriented
· Project Assessments, 1st party Walkdowns, 2nd party Walkdowns.
· Review ITPs
· Witness of Hold points.
· Contractor Surveillance and Performance Reporting
· Verification of change management, including deviations
· Approval of subcontractors and review of contractors' data and certification, inspection, and release of purchased components.
· Management and reporting of contractor non-conformances and corrective actions
· Monitoring the quality of the documentation to ensure that it is following Good Documentation Practice
· Acceptance of completed Trade Partner’s Test Pack
Preferable qualification
· You have graduated in the field of technical, engineering sciense and/or quality control.
· You have years of relevant professional experience and good knowledge of project and quality management (possibly on construction sites).
· Knowledge of Quality Management Systems
· Usable knowlege of quality core tools (PPAP, APQP, FMEA)
· Experiance in problem soving tools (8D, A3, Ishikawa, 5 Why)
· Your systematic approach is characterised by your ability to analyse and structure.
· Working knowledge of standards ISO 9001, ISO 14001, ISO 45001
· As an independent quality expert in our complex projects, management skills are a matter of course for you.
· Professional management experience (interdisciplinary).
· Experience with customers in international business.
· You communicate in English, both written and spoken. Visa mindre
Ansök

Installer

Ansök    Apr 3    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Installer

Ansök    Apr 2    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are s... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök

Installer Team Leader

Ansök    Apr 3    BTR Personnel services AB    Installationselektriker
Installer Team Leader - job description I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting ... Visa mer
Installer Team Leader - job description
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

III. Ability
• Troubleshooting installation issues
• Changes in the project
• Alignment with the acquired state of the object

IV. Team management
• Manages a team of 3-5 installers
• Makes sure the team has the equipment to work
• Makes sure that there is enough material to work with
• Controls the quality of works
• Introduces the new employee to the job
• Takes care of safety at work

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height
Good communication
Ability to organize work and people
Ability to manage time
The ability to develop and raise the knowledge of employees in the team Visa mindre
Ansök

Project Control Engineer

Ansök    Aug 22    BTR Personnel services AB    Projekteringsingenjör, bygg och anläggning
About the job The Project Control Engineer will play a key role in the Construction team, managing the Controls Strategy and implementation of the factory through to the start of production. The Project Control Engineer will implement overall project controls direction through application of systems and methods for estimate development, cost control, planning and reporting, progress measurement, schedule development/control and management of change. The P... Visa mer
About the job
The Project Control Engineer will play a key role in the Construction team, managing the Controls Strategy and implementation of the factory through to the start of production. The Project Control Engineer will implement overall project controls direction through application of systems and methods for estimate development, cost control, planning and reporting, progress measurement, schedule development/control and management of change.
The Project Control Engineer will manage and lead the Clients Owners Representatives and Contractors to carry out the Project Controls of designated construction projects and construction activity on the Ett campus in Skelleftea.
Key responsibilities include but are not limited to:
Provide overall project cost, schedule, estimating, progress measurement, and change management leadership and expertise in the Construction projects.
Review and report project cost/schedule with ongoing project analysis, reporting, forecasting, budgeting and change management
Control project cost/schedule outcomes by recommending and deploying management interventions with support of the Program, Project Management, Engineering, Procurements teams, executed through the Clients Owners Representatives and Contractors
Monitoring and appraising the performance of the Contractors and Consultants in the areas of cost control and progress measurement.
Develop cost and schedule estimates to support risk and opportunity assessments, Project funding, Project reviews, and ad hoc requests. Visa mindre
Ansök

Installer

Ansök    Apr 2    BTR Personnel services AB    Installationstekniker
I. Installation of clean room panels • Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings). • Placement of guides and U-profiles according to the drawn positions (base for the panel) • Placing the panel: o Smaller panel 3x1.2m weighing up to 75kg o Larger panels up to 12m high - lifting by robotic arm and vacuum The panels are... Visa mer
I. Installation of clean room panels
• Scaling positions for placing panels with a laser meter according to the blueprint and plan given by the design team-according to the project (knowledge of reading project drawings).
• Placement of guides and U-profiles according to the drawn positions (base for the panel)
• Placing the panel:
o Smaller panel 3x1.2m weighing up to 75kg
o Larger panels up to 12m high - lifting by robotic arm and vacuum
The panels are screwed into each other.
• Installation of hangers and L-profiles for the ceiling; screws into the panel
• Hanging the ceiling, screwing and fixing it to make it as strong as possible
• Placing and screwing the holker into the ceiling and floor to close all voids and ensure solidity
• Installation of double-glazed windows
• Installing the door:
o Rolling doors
o Slide
o Regular
• Cutting holes for sockets and switches according to the project
• Siliconization of all joints and all elements
II. Installation of HVAC systems
• Creating channels for air flow
o Polyurethane styrofoam pieces are cut according to the blueprint and sorted
o Gluing the parts to form a channel
o PT3 tape is glued to the cones
o The flanges for connecting the ducts are tapped
o Siliconization of all joints
• The finished channel is placed on the ceiling
• Connection of HVAC units
• Screwing, installation of sealing tape and siliconization
• Each chamber has its own damper/valve to which the channel is attached:
o Sponge tape and silicone
• Installation of housing and HEPA filter

Tool handling:
1. Screwdriver
2. Sander
3. Hammer
4. Parakeets-pincers
5. Burgia
6. Tools for cutting aluminum

Operation of machines:
1. Forklift
2. Robotic arm
3. Lifting platform and equipment for working at height

Permit to work at height Visa mindre
Ansök
Copyright © 2025 - Alla rättigheter reserverade.